Category Archives: Vendors

Owner paid a subcontractor with his own money. How to make sure Vendor shows up on 1099 and still able to write the reimburse check to the Company Owner

First, you will need to create a new dummy bank account. You will also need a due to the owner as a liability type account to use it for later reimbursement.

Step#1 Use bank deposit form (create + sign > other > bank deposit) to record contributed amount by the owner to pay a contractor. Account to show as due to the owner liability type account. See screenshot below.

owner deposit
owner deposit

Step#2 Use Expense form (create + sign > vendor > expense) to create contractor expense posted to appropriate expense account. See screenshot below.

contractor expense
contractor expense

Step#3 Use Check form (create + sign > vendor > check) to write the reimburse check to the Company Owner. See screenshot below.

check to owner
check to owner

In case there is no need to reimburse the owner (step#1), you will use a capital contributed account which would be an Owner’s Equity type account.

Review of 1099 vendors and payments list. See screenshot below.

review 1099 vendors payments
review 1099 vendors payments

If you found our answers useful then please contribute few bucks to support this forum. Thank you!





Thank you!








2015 Laser 1099-MISC Income, Federal Copy A, Bulk

2015 Laser 1099-MISC Income, Federal Copy A, Bulk


Sign up QuickBooks for a 30-day FREE Trial

QuickBooks USA





QuickBooks Canada






QuickBooks UK



QuickBooks Online 30 day Free Trial



QuickBooks Australia




How to handle when a customer has an overpayment in account balance and goes out of business

Accounting treatment in QuickBooks is exactly the same like when Vendor goes out of business prior to payment for the open balance.

If the vendor (or customer with a credit balance) goes out of business due to bankruptcy, keep it until you hear from the courts with instructions as to where to forward your payment.

In case, you do not hear from the courts (depending upon regulations in your state, you may have to leave it on the books for several years, in many states for up to 5 years), you will reverse the entry by creating a credit memo and take it as income like the one-time gain to your P&L.

If you are really interested in clearing A/P or A/R (negative balance), you can also set it up as holding liability account on your Balance Sheet.


 

If you found our answers useful then please contribute few bucks to support this forum. Thank you!





Thank you!








2015 Laser 1099-MISC Income, Federal Copy A, Bulk

2015 Laser 1099-MISC Income, Federal Copy A, Bulk


Sign up QuickBooks for a 30-day FREE Trial

QuickBooks USA





QuickBooks Canada






QuickBooks UK



QuickBooks Online 30 day Free Trial



QuickBooks Australia




#QuickBooks – How do I enter and print reference information on voucher checks?

In QuickBooks Online, there is no feature setup to print reference number (or vendor bill number) on voucher checks. Reference number comes directly from entered bill number field.

 

Here is a sample of Voucher Check printout:
Click on the screenshot below to enlarge it
voucher check

  • Reference column = entered vendor invoice number on “bill no.” field
  • Original amount = vendor invoice amount
  • Printer setup selection = voucher (not standard)

Weekly Price Check US CA UK AU (Plus Plan)

USACanadaUKAustralia
us120x90ca120x90uk120x90au120x90
USD 23.97 per monthCAD 14.50 per monthGBP 15.00 per monthAUD 21.00 per month
USD 23.97 per monthUSD 12.01 per month
(Conversion)
USD 23.30 per month
(Conversion)
USD 16.60 per month
(Conversion)
LOWEST PRICE!

 

#QuickBooks Online

 

How do you mark a bill as paid if paid by your parent company (not by your bank account or credit card)

First, you need to get some guidance from the parent company if they go through inter-company elimination process to prepare consolidated balance sheet report.

In QBO create Intercompany Accounts Payable Account (not main Accounts Payable A/P) >

you can select “Credit Card” Type > it will show as Credit Card group on the Balance Sheet. When you Pay Bills (or enter expenses), you can select this account instead of bank account > easy one step process only > however, if parent company has a problem using Credit Card type account then, you may need to set it up as “Other Current Liabilities” type account.

In that case, it becomes two step process > pay bills (or enter expenses) using Credit Card type as I/C clearing account > transfer the balance from Intercompany Accounts Payable (other current liabilities type) to Intercompany Clearing account (credit card type > new name). To transfer in QBO, you can use Transfer (create + sign > other > transfer) or write a Journal Entry (and make it reversible JE if needed).

Again, it’s a good idea to consult with your parent company who handles Intercompany accounts. And, always reconcile accounts on a regular basis.

Click on the screenshots below to enlarge them
ic payable

ic paybills

ic payable2

transfer

transfer_je

balsheet2
NOTE:
On the parent company’s books, they should record this as an intercompany accounts receivable.
In QBO for Intercompany Accounts Receivable > select “Other Current Assets” Type (not main Accounts Receivable A/R type. In QBO, you can have just one A/R).

How I can generate a 1099 summary report for non-employee compensation in QuickBooks Online Plus?

There is no built-in 1099 related summary report for non-employee compensation at this time

Here is how you can get that information.

Go to prepare 1099-MISC forms screen (blue navigation bar > vendors > prepare 1099s button (right corner) > “Follow the steps to prepare 1099-MISC forms” screen > Choose “Print using purchased forms” link (at the bottom) > side arrow will move down and expand with more information > select “Print Information Sheet” blue button (at the bottom).

It will show printable “1099 Information Tax Year 2014” report.

print using purchased forms
print information sheet
1099 information report


Updated 12/10/2015:

It used to be able to preview the 1099 Summary Report without having gone through all the prepare 1099 steps. There is no way to preview accounts and vendors meeting the threshold without going through the prepare 1099s steps now. It is not clear why the “1099 Transaction Detail by Vendor” is not even a built-in report at this time.

To run this report (go through all the steps), click on the Box 7 payment amount by any vendor to get a vendor report to support that value. See attached screenshots below.

prepare 1099s
1099 transaction

If you want to run this report for another vendor, you will need to do it all over again. Would not it be nice if they have the simple build-in “1099 Transaction Detail by Vendor” for ALL the vendors in one customize format?

Send them your feedback before it’s too late for this year.
Gear (upper right corner) > your company > FEEDBACK.

How should I really enter refund by a Vendor in new QuickBooks Online?

I followed the refund by a vendor. I entered as a deposit. But then it does not show in the vendor’s transaction listing. How should I really enter this type of transaction?

At this point, they do not have have any designated way to record this transaction. It is just work-around approach to show in the Vendor Center’s transaction listing.

#1 Create Vendor Credit
From the home page screen

  • Select “Vendor Credit” tab under Vendors heading
  • Choose a vendor
  • Make sure account selection (that be entered as account for credit entry) is the same as original account. This is to show applying credit to the same account. For example, you bought printer and expensed it to Computer Expense account . Returned it and received refund for the returned item. Use the same account to credit the refund from the vendor.

#2 Show Bank Deposit for Refund
From the home page screen

  • Select “Bank Deposit” tab under Others heading
  • Choose Bank account for deposit
  • Received From = Name of Vendor from the drop down list who gave you refund
  • Account = Accounts Payable from the dropdown chart of account
  • Amount = refund amount deposited to the bank
  • Enter other related information
  • Save

#3 Unncessary extra step but got to do it

GO back to Vendors Center (blue navigation bar > Vendors > Locate specific Vendor), you will notice “1 Open bill” message under Pending Bills for that Vendor. This could be flawed in QBO design at this time.

  • Select “Make payment” button under “Action” column
  • New “Bill Payment” screen will open
  • You will notice in and out with zero amount transaction
  • Change Ref number to “blank”
  • Save and Close

“1 Open Bill’ message is gone now.
Again, this is unncessary step in new QuickBooks Online.

How should I really enter refund by a Vendor in new QuickBooks Online QBO

How to set it up and enter bank Line of Credit (LOC) transactions in new QuickBooks Online?

To track a line of credit (LOC) extended to your business, create a liability account with an opening balance of zero in your Chart of Accounts.

Chart of Accounts
Chart of Accounts

From the Home page screen

  • Go to the Company Gear (right upper-corner)
  • Select Chart of Accounts under Settings header
  • Select blue “New” button (right corner)
  • New “Account” information screen will open
  • Category Type = Other Current Liabilities
  • Detail = Line of Credit
  • Name = Line of Credit (or Chase Line of Credit if preferred to name the bank)
  • Description Line of Credit (or same as name)
  • Balance = Leave opening balance as “0” (zero even if you’ve already used LOC and has balance. It’s better to enter transaction later.)
  • Click “Save” button
Add new LOC account
Add new LOC account

To record (for example $100,000.00) the LOC extended to your company and deposited to main Checking account:

Bank Deposit
Bank Deposit

From the Home page screen

  • Go to Create “+” sign (top middle)
  • Deposits under Other header
  • Ensure the proper Deposit to account is selected (in this example, Chase Checking Account)
  • Date = Enter bank posted date
  • Go “Add New Deposits” section
  • Received From = Chase LOC Payment (Add New as Vendor if needed)
  • Account = Line of Credit (Select the “Line of Credit” account just created as “Other Current Liabilities) from the Account drop-down arrow)
  • Description = For example, Chase line of credit deposited to Chase Checking Account
  • Payment Method = Bank Online or appropriate (add new if needed)
  • Ref Number = Enter last four digits of LOC number (optional)
  • Amount = $100,000.00
  • Attachments (paper clip icon) = Upload picture of related document (if available)
  • Click “Save and New or Save and Close” blue button

This entry will show you have added $100,000 as deposit to Chase Checking Account and $100,000 as liability to Chase LOC account.

loc deposit
loc deposit

To record just interest charges (in this example $500 interest charges) applied to the LOC by your financial institution:
See instructions below for making Principal and Interest Payment.
From the Home page screen

  • Select blue navigation bar on the left
  • Select Transactions
  • Select Registers
  • Locate Line of Credit Account register
  • Double click Line of Credit Account
  • Liability for Line of Credit screen will open
  • Enter the date of the interest charge (for example 4/30/2014)
  • Financial institution name where the line of credit is held as the Payee (in this example Chase LOC Payment)
  • Enter the interest charge in the Increase column (in this example $500.00)
  • Choose Interest Expense account from the “Account” drop-down arrow
  • Enter “Memo” as Interest Expense for the period (in this example for April, 2014)
  • Click Save
Record Interest Expense
Record Interest Expense

To record a repayment of the LOC and/or payment of interest charges:
(In this example making $5,000 LOC payment from Chase Checking Account ($4,500 principal and $500 interest)

From the Home page screen

  • Select Create “+” sign
  • Select “Expense” (if paid Online) or Select “Check” (if issued Check) under Vendors header. In this example, we are making online payment.
  • Click the LOC Account as Payee from drop-down arrow (“Chase LOC Payment” in this example)
  • Choose the bank account you want to make payment from (“Chase Checking Account” in this example)
  • Expense Date: = Payment Date (for example 4/30/2104)
  • Payment Method: = Bank Online
  • Under Account Details, click the drop-down arrow and choose the “Line of Credit” account (Other Current Liabilities type),
    Under Description = Principal Payment
    Under Amount = $4,500.00
  • On the second line, Under Account Details, click the drop-down arrow and choose the “Interest Expense” account (Expenses type),
    Under Description = Interest Payment
    Under Amount = $500.00
  • Make sure total payment is $5,000.00
  • Attachments (small paper clip icon, bottom left): Upload photo of LOC statement. Optional but recommended.
  • Click Save and New or Save and Close button
LOC payment
LOC payment

To enter a payment that has been made directly from the LOC to a vendor, where no bills have been entered:
In this example, we are making $10,000 payment to Simon Manufacturing for purchased materials.
From the Home page screen

  • Select blue navigation bar on the left
  • Select Transactions
  • Select Registers
  • Locate Line of Credit Account register
  • Double click Line of Credit Account
  • Liability for Line of Credit screen will open
  • Enter the date of the purchase (for example 4/30/2014)
  • Name of Vendor Payee (in this example Simon Manufacturing)
  • Enter the amount in the Increase column (in this example $10,00.00)
  • Choose Purchases Expense Account from the “Account” drop-down arrow
  • Enter “Memo” as Buying Materials (for example XYZ job)
  • Click Save

NOTE: This transaction will not show up on Vendors Center record. For to show transaction recorded on Vendors Center, see three-steps process below.

LOC purchases
LOC purchases

To pay bills where funds have gone directly from the line of credit to the Vendor Entered Bill as Accounts Payable:
This involves three steps process.

Step # 1 Enter Vendor Bill

Enter Vendor Bill
Enter Vendor Bill

From the Home page screen

  • Select Create “+” sign
  • Select “Bill” under Vendors header
  • Select Vendor = Simon Manufacturing
  • Date = 4/30/1014
  • Under Account Details column, select Account = Purchases Expenses Account for example
  • Amount = $10,000.00
  • Click Save and Close button

This entry will created Accounts Payable balance of $10,000.00 to Simon Manufacturing’s account

Step # 2 Write Journal to show payment to Vendor by LOC

Journal Entry
Journal Entry

From the Home page screen

  • Select Create “+” sign
  • Journal Entry under Other
  • Enter the date (for example 4/30/2014)
  • On the first line, click the Account drop-down arrow and select Accounts Payable
  • Under the Debit column, enter the amount ($10,000 in this example) you paid the vendor
  • Enter a memo such as “Paid from line of credit”
  • Under Name, click the drop-down arrow and select the vendor you paid (“Simon Manufacturing” in this example)
  • On the second line Under Name, click the Account drop-down arrow and select the line of credit account (“Line of Credit” in this example)
  • Under the Credit column, enter the amount you paid the vendor ($10,000 in this example)
  • Enter a memo such as “Paid from line of credit”
  • Click Save and Close
Journal Entry for Purchase Payment
Journal Entry for Purchase Payment

Step # 3 Now you need to link the bill payment to the vendor credit paid by LOC:
From the Home page screen

  • Select Create “+” sign
  • Select “Pay Bills” under Vendors header
  • Under Pay to the Order of, select the vendor name (Simon Manufacturing)
  • Under Choose an account for Bank, Select Bank Clearing Account (Add new if needed. This account will always have zero balance.)
  • The screen will refresh and you’ll see a matching amount under Credits and Bill Payment Information.  Click the checkboxes so the amounts match.
  • Leave the amount blank as “0.00” zero. It’s “In and Out” entry, so amount should be zero
  • Click Save and Close button

This entry will clear Accounts Payable and will show payment transaction on Vendor Center.

Apply LOC payment to vendor 1
Apply LOC payment to vendor 1

If you found our answers useful then please contribute few bucks to support this forum. Thank you!





Thank you!